The EFR II with DLC coating greatly reduces line friction allowing the fishing line to run more smoothly over this smooth surface, prolonging the life of the fishing line and the prevention of line twist.

DFD incorporates both surfaces of the spool to maximize high-end drag pressure, efficiency and overall smoothness.

LITECAST® construction design is 15% lighter than former Azores reels while maintaining maximum strength and durability.

Ultimate pinion stability for prefect main gear adjustment: super smooth gearing feeling and high durability.

6 high performance ball bearings provide the Salina reels with outstanding smoothness and reliability in saltwater fishing environments. The balls used on the HPB's are constructed from the same high-grade stainlesssteel material as the bearing housing.

The EFR II with DLC coating greatly reduces line friction allowing the fishing line to run more smoothly over this smooth surface, prolonging the life of the fishing line and the prevention of line twist.

The one-piece bail is a seamless main gear design that reduces friction on the bail, allowing unobstructed line entry into the roller.

DFD incorporates both surfaces of the spool to maximize high-end drag pressure, efficiency and overall smoothness. Mounted in the top of the spool and protected by the Hydro Block system is a multi-disc carbon drag system that works in conjunction with a secondary drag system that is mounted under the spool. Even pressure is applied to both surfaces of the spool for maximum stability and significantly Increased drag output compared to traditional single drag systems.

Oversized Titanium Spool Shaft reduces flex.

The balls used on the HPB's are constructed from the same high-grade stainless-steel material as the bearing housing. These bearings were designed to be 10 times more resistant to saltwater than standard stainless-steel bearings.

AlumiLite construction incorporates Okuma's rigid aluminum body technology on spinning, trolling and fly reel designs. Aluminum frames are stronger and more rigid and can withstand more pressure and torque than traditional graphite frames. These lightweight, diecast aluminum frames provide more precise tolerances for precision gear alignment, maximum castability and ultimate durability.

In order to deal with the harsh saltwater environment, Okuma engineers developed a full waterproof body, reaching an IPX7 rating (1 meter submersion for up to 30 minutes). Giving anglers peace of mind

Under the traditional high-strength HDGII, Okuma enlarged the main gear to provide better strength and higher gear ratio. Taking the 10000-size as an example, the Tesoro spinning main gear is larger than conventional by 12%.

In standard reels, when the main shaft is moved up and down, a large area of friction is generated with the inner hole of the pinion gear, which causes you to feel resistance when turning. To reduce drag and achieve the lightness of rotation, we hollowed out the center of the pinion gear to reduce friction with the shaft. This change helps create a zero inertia start up and an incredibly light feel when turning the handle.

This design provides excellent support on the top, middle and bottom of the pinion gear, making the gears extremely stable and durable.

The EFR II with DLC coating greatly reduces line friction allowing the fishing line to run more smoothly over this smooth surface, prolonging the life of the fishing line and the prevention of line twist.

In most reels, when the main shaft is moved up and down, a large area of friction is generated within the pinion gear which causes you to feel resistance when turning the handle. To reduce drag and achieve a free rotation, we hollowed out the center of the pinion to reduce friction with the shaft. This change to the pinion gear creates the ultimate in stabilization and a friction-free handle winding experience.

Under the original high-strength HDGII, Okuma has enlarged the main gear to provide better strength and a higher gear ratio. Taking the 3000 sizes as an example, the Ceymar HD main gear is larger than the standard gearing by 7%.

Provides excellent support on the top, middle and bottom of the pinion gear, making the gears extremely stable and durable.

Light weight and machined Aluminum Screw-in Handle screws directly into the reel, providing a direct and secure connection.

The EFR II with DLC coating greatly reduces line friction and prevents fishing worn out in addition to frictionless free rolling on the line roller to reduce line twist.

The one-piece bail is a seamless design that reduces friction on the bail, allowing unobstructed line entry into the roller.

Okuma's ALL NEW "Carbonite" drag system features a newly-developed carbon-based drag material which displaces heat and friction consistently and steadily even under the harshest of fishing conditions. Used in conjunction with a small amount of specially-formulated Okuma drag grease, the Carbonite drag system allows for a much wider and smoother drag range, all while maintaining exceptional performance and pure fish- stopping power.

Ultra Light Spool: 1500 Size Only 70g

Okuma Flite Surf features a C-40X carbon body, sideplate and rotors for extreme lightness.

The Flite Surf is equipped with ultra-lightweight, A7075 aluminum shaft.

Machined aluminum screw-in handle design provides ultimate strength and lightweight use.

Provides excellent support on the top, middle and bottom of the pinion gear, making the gears extremely stable and durable.

In the previous reels, when the main shaft moved up and down, a large area of friction was generated with the inner hole of the pinion, which caused you to feel resistance when turning. In order to reduce drag and achieve the lightness of rotation, we hollowed out the center of the pinion to reduce friction with shaft. To achieve the excellent lightness that maintains the original support strength and makes you feel the rotation.

The EFR II with DLC coating greatly reduces line friction and prevents fishing worn out in addition to frictionless free rolling on the line roller to reduce line twist.

Okuma's ALL NEW "Carbonite" drag system features a newly-developed carbon-based drag material which displaces heat and friction consistently and steadily even under the harshest of fishing conditions. Used in conjunction with a small amount of specially-formulated Okuma drag grease, the Carbonite drag system allows for a much wider and smoother drag range, all while maintaining exceptional performance and pure fish- stopping power.

Fully machined aluminum for an ultra-lightweight spool including an 8000 size and 1500 size reducer.

The one-piece bail is a seamless design that reduces friction on the bail, allowing unobstructed line entry into the roller.

Okuma Obsidian Spinning Reel features a C-40X carbon body, sideplate and rotors for extreme lightness.

The Obsidian carp reel is equipped with ultra-lightweight, A7075 aluminum shaft.

Machined aluminum screw-in handle design provides ultimate strength and lightweight use.

Gearing Stabilization Design of the Obsidian carp provides excellent support on the top, middle, and bottom of the pinion gear, making the gears extraordinarily stable and durable

In the previous reels, when the main shaft moved up and down, a large area of friction was generated with the inner hole of the pinion, which caused you to feel resistance when turning. In order to reduce drag and achieve the lightness of rotation, we hollowed out the center of the pinion to reduce friction with shaft. To achieve the excellent lightness that maintains the original support strength and makes you feel the rotation.

The lightweight and rigid C-40X long strand carbon fiber is featured in the body, side plates and rotor give and provide extra strength where it is needed the most.

The one-piece TCA™ design was built using Okuma C-40X carbon fiber technology and made with a double arm design. Compared to traditional single side designs, TCA™’s double arm offers higher torsion and flex resistance under heavy pressure for improved strength. This not only makes the reel lighter but also extremely rigid ensuring the internal parts stays in perfect alignment.

Housed in the spool is the multi-disc, carbon fiber drag system with hydro-block gasket keeping your drags dry and running smooth.

The machined aluminum handle screws are directly put into the reel for the ultimate in a direct and secure connection.
(TGT: Traction Grip Technology)

The 7 HPB+1RB high performance ball bearing system keeps the reel running smoothly in freshwater and light inshore applications.

Magnesium frame with extra ordinary treatment for corrosion resistance. Extra compact body, only 167g (5.9oz).

The Hakai has uniquely designed stainless-steel and carbon fiber hybrid drag washers for maximum drag output up to 9kg (20lbs).

The Hakai is equipped with a durable, oversized 42 mm hardened brass main gear for extreme cranking power.

Patented hollow stainless steel main shaft with precision SUS balls pressed on 2 ends. Providing the perfect balance point between weight, Strength and smoothness.

Dream Tackle Design super tuned spool, 33 mm O/D, 0.4mm uniform thickness. Spool assay weights only 9.5g (0.33oz) with bearing which can be used for ultra wide casting range.

Always know what line you spooled on your reel when you pick it up.

The Hakai features durable 90mm aluminum handle and EVA grip for ultimate comfort while on the water.

Okuma's Machined Rigid Frame construction incorporates a one-piece fully machined aluminum frame. These rigid bar-stock aluminum frames are the ultimate in precision alignment and tolerances withstanding more pressure and torque than any other frame material used in the industry.

17-4 grade stainless steel gearing that works in conjunction with a dual force drag system to maximize smoothness, reliability, and reduce side-load.

For extremely smooth and strong drag outputs, Okuma’s Alijos lever drags feature the same patented Dual Force Drag system used in the Makaira. This drag system is specifically engineered to be mounted in the right side of the spool, designed around a Pull Bar Drag System which keeps all mechanical workings in precise alignment and places no pressure on the frame. This system works in conjunction with a custom designed thrust bearing, which alleviates side load at heavy drag settings.

Okuma utilizes our CRC or Corrosion Resistant Coating process to all internal and external parts for maximum protection. Our CRC process utilizes a coating process of Corrosion X HD formula that penetrates and bonds to the aluminum parts for long term protection.

Okuma's new Serrano baitcast reels feature a lightweight, corrosion-resistant body and side-plates. Designed with a smaller, more compact body, the Serrano is contoured to fit nicely in the palm of your hand. Packed with features and sharp to look at, the Serrano was created for everyday angler.

The Serrano baitcast reel features a 6BB + 1RB precision stainless steel bearing drive system for long, smooth casting and a quick-set anti-reverse bearing for solid hook sets.

The precision cut, high strength brass main and pinion gears run smoothly and are designed for maximum durability while on the water.

Utilizing multi-disc drag washers for consistent performance, the Serrano is packed with over 11 lbs of stopping power.

Featuring an externally adjustable magnetic cast control system, the Serrano gives anglers the flexibility to dial in their reel by slowing the spool in conditions that call for extra control and finesse.

Speaking of spool, the Serrano is built around a 33.5mm machined aluminum, black anodized spool, bringing the overall size of the reel down to a compact platform.

To top it off, the new Serrano baitcast reel features Okuma’s TGT: Traction Grip Technology, with a double paddle 95mm aluminum swept handle arm allowing for all day ‘cast and retrieve’ comfort.

To top it off, the new Serrano baitcast reel features Okuma’s TGT: Traction Grip Technology, with a double paddle 95mm aluminum swept handle arm allowing for all day ‘cast and retrieve’ comfort.

The Komodo SS is built around a heavy-duty stainless steel main gear, pinion gear, drive shaft and spool shaft to deliver an internal foundation of unrelenting strength and corrosion-resistance.

Komodo SS reels continue with premium components including: high-output carbonite drag system.

The Komodo SS features micro-click drag star for precise drag settings.

The Komodo SS also features synchronized levelwind optimized for braided line, and zirconium line guide inserts for use with braided line. This ensures that when fishing braided lines, the level-wind always maintains alignment with line as it comes off the spool.

Toggle for audible clicker when trolling, chunking or bait fishing. Clickers are standard on all models.

The Komodo SS is equipped with A6061-T6 machined aluminum, and anodized spool.

The Komodo SS is with comfortable machined aluminum power handle, that makes it a pleasure to use.

The brand-new TCA features an advanced aluminum construction, providing up to more than 5 times rigidity and strength to the previous C-40X TCA. The new aluminum TCA excels with its elevated torsion and flex resistance, ensuring exceptional stability even under intense pressure.

Under the original high-strength HDGII, Okuma has enlarged the main gear to provide better strength and a higher gear ratio. Taking the 3000 sizes as an example, the Inspira main gear is larger than the standard gearing by 7%.

To ensure ultimate support and reliability in every aspect of the pinion gear, Okuma has employed a revolutionary Gearing Stabilization Design that offers unparalleled stability and durability.

To increase the lightness of rotation and reduce drag, Okuma incorporated a hollowed-out center design in the pinion gear. By reducing friction between the gear and the shaft, anglers can experience a seamless, zero-inertia start-up and a remarkably light and effortless handle turn.

Maximizing high-end drag pressure, efficiency, and overall smoothness, the Inspira features a multi-disc drag system crafted from premium carbon fiber. Enhanced by the Hydro Block gasket, this innovative combination ensures unparalleled performance on the water.

Crafted with precision, the Inspira features a lightweight and durable machined aluminum spool. This remarkable construction not only reduces the overall weight of the reel but also ensures unparalleled performance and longevity.

The Inspira features an upgraded configuration of 8 + 1 high-performance bearings, delivering an unparalleled realm of smoothness.

Cyclonic Flow Rotor (CFR) was designed to create “cyclonic” airflow, which significantly increases air around the rotor, beneath and around the spool, with every turn of the handle. This thoroughly tested design allows for a much faster drying time if the reel becomes wet, minimizing corrosion and extending longevity of the reel.

The Even Flow Roller System with DLC coating greatly reduces line friction allowing the line to run smoothly, prolonging the life of the line and preventing line twist.

The Inspira is equipped a heavyduty, solid aluminum bail wire with unwavering strength and resilience, designed to resist distortion, even when faced with intense pressures.

The Inspira is also equipped with a light weight, machined Aluminum Screw-in Handle that screws directly into the reel, providing a direct and secure connection.

Immerse yourself in a world of versatility with the Okuma Inspira, offering an extensive range of sizes from 2000 to 5000 to cater to every angler's unique needs.

The Ceymar is crafted with a corrosion-resistant graphite body, ensuring exceptional durability and longevity.

Elevating its performance and style, the New Ceymar features a precision-machined aluminum, 2-tone anodized spool.

To increase the lightness of rotation and reduce drag, Okuma incorporated a hollowed-out center design in the pinion gear. By reducing friction between the gear and the shaft,
anglers can experience a seamless, zero-inertia start-up and a remarkably light and effortless handle turn.

The New Ceymar lineup presents a range of handle knob options designed for optimal comfort and functionality. Models 500 to 2500 feature I-shape handle knobs, ensuring a secure grip and effortless control. Models 3000 and 4000 showcase newly introduced TPE handle knobs, meticulously crafted to provide unparalleled comfort.

6000 and 8000 models feature ergo grip handle style design.

The new Okuma New Ceymar spinning reel leaves no angling challenge unmet. With an impressive range of sizes from 500 to 8000, it offers anglers a multitude of options suitable for both freshwater and saltwater pursuits. Regardless of your preferred fishing style, the New Ceymar rises to the occasion and delivers unparalleled performance and adaptability.

Using lightweight and rigid C-40X material in its TCA foot, rotor, and handle, the ITX CB reel achieves a remarkable reduction in weight without compromising its exceptional strength.

Okuma has significantly reduced the weight of the aluminum spool in the ITX CB reel. They have achieved a remarkable 30% reduction when compared to the current ITX model.

The Aluminum 7075 spool shaft and key washer within the ITX CB are also designed to reduce weight.

To increase the lightness of rotation and reduce drag, Okuma incorporated a hollowed-out center design in the pinion gear. By reducing friction between the gear and the shaft, anglers can experience a seamless, zero-inertia start-up and a remarkably light and effortless handle turn.

Enhancing both style and functionality, the ITX CB reel also boasts a Carbon handle arm, complemented by a comfortable felt EVA knob. This winning combination not only adds a touch of elegance to the reel's design but also provides anglers with a superior grip and enhanced control.

Maximizing high-end drag pressure, efficiency, and overall smoothness, the ITX CB features amulti- disc drag system crafted from premium carbon fiber. Enhanced by the Hydro Block gasket, this innovative combination ensures unparalleled performance on the water.

The Even Flow Roller System with DLC coating greatly reduces line friction allowing the line to run smoothly, prolonging the life of the line and preventing line twist.

The one-piece TCA™ design was built using Okuma C-40X carbon fiber technology and made with a double arm design. Compared to traditional single side designs, TCA™’s double arm offers higher torsion and flex resistance under heavy pressure for improved strength. This not only makes the reel lighter but also extremely rigid ensuring the internal parts stays in perfect alignment.

Cyclonic Flow Rotor (CFR) was designed to create “cyclonic” airflow, which significantly increases air around the rotor, beneath and around the spool, with every turn of the handle. This thoroughly tested design allows for a much faster drying time if the reel becomes wet, minimizing corrosion and extending longevity of the reel.

The Centrifugal Disc Bail (CDB) design incorporates a heavier brass disc that is perfectly weighted and balanced to create smoother bail operations. CDB increases the strength and stability of bail functions.

Okuma’s C-40X long strand carbon fiber technology utilizes a special blended graphite polymer. The carbon fibers in this material are elongated and reinforced, which creates a substantially stronger composite than standard graphite. At 25% lighter, 50% stronger and 100% anti-corrosive, the Epixor XT's carbon fiber frame and side plate are extremely lightweight and durably constructed.

Okuma’s 1-K woven carbon fiber drag knob is light weight and creates progressive drag settings. Our progressive drag allows you to customize settings to specific conditions and fish or adjust your drag during a long fight.

Okuma's LITECAST® construction design is 15% lighter than former Azores reels while maintaining maximum strength and durability.

DFD incorporates both surfaces of the spool to maximize high-end drag pressure, efficiency and overall smoothness. Mounted in the top of the spool and protected by the Hydro Block system is a multi-disc felt drag system that works in conjunction with a secondary drag system that is mounted under the spool. Even pressure is applied to both surfaces of the spool for maximum stability and significantly increased drag output compared to traditional single drag systems.

Manual bail trip function for both reliability as well as reduces line twists.

Ultimate pinion stability for perfect main gear adjustment : super smooth gearing feeling and high durability.

6 high performance ball bearings provide Cedros with outstanding smoothness and reliability in saltwater fishing environments. The balls used on the HPB's are constructed from the same high-grade stainless steel material as the bearing housing.

6061-T6 machined aluminum frame, sideplate and spool

Carbon Mechanical Stabilizing System Patented design stabilizes the spool shaft at 3 key stress points to eliminate flex under pressure. The reel is more durable, stronger and smoother than the competition.

Proprietary drag system allows for instant adjustments to drag when under pressure.

- 17-4 grade stainless steel helical cut gearing
- Multi-disc Carbonite drag system with Cal’s drag grease Max Drag: 10 Kg

- Ergo grip handle knob with anodized aluminum handle arm
- Anodized aluminum swept handle reduces wobble while cranking

- Dual anti-reverse (mechanical and roller bearing)

Okuma's Machined Rigid Frame construction incorporates a one-piece fully-machined aluminum frame. These rigid bar-stock aluminum frames are the ultimate in precision alignment and tolerances withstanding more pressure and torque than any other material used in our industry for frame materials.

The patented design of the T-Bar handle offers a true ergonomically correct angle to ensure an angler gets maximum power with minimum fatigue. The T-bar takes full advantage of the natural dynamics of the human hand, wrist and forearm to help sustain power and endurance for the angler.

Okuma's 2-speed technology incorporates two sets of stainless steel main and pinion gears, allowing anglers the option of a high-speed gear ratio or a powerful low-speed gear ratio for maximum power and torque. To shift gears it is as easy as pushing a button or popping a lever with Okuma's unique shifting design to obtain the appropriate gear ratio you desire.

For extremely smooth and strong drag outputs, Okuma’s Makaira lever drags are designed with a patented Dual Force Drag system. This drag system is specifically engineered to be mounted in the right side of the spool, designed around a Pull Bar Drag System which keeps all mechanical workings in precise alignment and places no pressure on the frame. This system works in conjunction with a custom designed thrust bearing, which alleviates side load at heavy drag settings.

Makaira lever drag reels utilize helical cut main and pinion gears. This process allows for improved gear meshing which equates to improved gear smoothness. The angled teeth found in helical cut gears engage more gradually than straight cut or spur gear teeth. This allows helical gears to run smoother and quieter compared to spur gears. Spur gears cause impact stress and noise, because of the hard meshing and can not take as much torque as helical gears because their teeth are receiving impact blows as they mesh together.

The Makaira's proprietary anti-reverse system allows for a smoother and quieter feeling. Most reels in the market hide their rough gear quality by the noise and vibration caused by the engagement and clacking of the anti-reverse pawls. This anti-reverse system is supported by a 12 point double dog anti-reverse pawl system. The Makaira system is very simple in principal but the performance is extremely advanced.

Corrosion Resistant Coating combines Okuma’s proprietary HDG-II gearing system, which offers exceptional anti-corrosive properties compared to standard gears, with a coating of Corrosion X HD to all internal and external parts. The CRC process actually penetrates and bonds to the metal, which helps significantly toward long term protection.

Okuma's Machined Rigid Frame construction incorporates a one-piece fully-machined aluminum frame. These rigid bar-stock aluminum frames are the ultimate in precision alignment and tolerances withstanding more pressure and torque than any other material used in our industry for frame materials.

Okuma applies our CRC or Corrosion Resistant Coating process to all internal and external parts for maximum protection. Our CRC process utilizes a coating process of Corrosion X HD formula that actually penetrates and bonds to the aluminum parts for long term protection.

The Ergo Grip handle knob is an extremely comfortable oversized handle-knob design for both speed and power. This soft-touch knob has been ergonomically designed to fit in the palm of your hand.

Cavalla Lever Drag Reel features 17-4 grade stainless steel main and pinion gears.

Okuma's Machined Rigid Frame construction incorporates a one-piece fully machined aluminum frame. These rigid bar-stock aluminum frames are the ultimate in precision alignment and tolerances withstanding more pressure and torque than any other frame material used in the industry.

For extremely smooth and strong drag outputs, Okuma’s Alijos lever drags feature the same patented Dual Force Drag system used in the Makaira. This drag system is specifically engineered to be mounted in the right side of the spool, designed around a Pull Bar Drag System which keeps all mechanical workings in precise alignment and places no pressure on the frame. This system works in conjunction with a custom designed thrust bearing, which alleviates side load at heavy drag settings.

Alijos 2-Speed Lever Drag Reel features 17-4 grade stainless steel main and pinion gears.

Okuma utilizes our CRC or Corrosion Resistant Coating process to all internal and external parts for maximum protection. Our CRC process utilizes a coating process of Corrosion X HD formula that penetrates and bonds to the aluminum parts for long term protection.

Makes the line wind more straight and tight, reduce the friction when casting. Uper Long Stroke Spool 45mm.

Cyclonic Flow Rotor (CFR) was designed to create “cyclonic” airflow, which significantly increases air around the rotor, beneath and around the spool, with every turn of the handle. This thoroughly tested design allows for a much faster drying time if the reel becomes wet, minimizing corrosion and extending longevity of the reel.

Surf 8K equips super long stroke spool 45mm.

Surf 8K equips upgraded worm shaft transmission system, strengthens the construction, let the reel more rigid, makes the line wind more straight and tight, working more smoothly.

This fast progressive drag allows a setting from low drag power to almost full drag power in less than 360° rotation.

Prevent line twist between rotor and main shaft effectively.

Prevent rotor to turn around and reverse when casting.

Cyclonic Flow Rotor (CFR) was designed to create “cyclonic” airflow, which significantly increases air around the rotor, beneath and around the spool, with every turn of the handle. This thoroughly tested design allows for a much faster drying time if the reel becomes wet, minimizing corrosion and extending longevity of the reel.

Makes the line wind more straight and tight, reduce the friction when casting. Uper Long Stroke Spool 45mm.

The 8K equips super long stroke spool 45mm.

8K equips upgraded worm shaft transmission system, strengthens the construction, let the reel more rigid, makes the line wind more straight and tight, working more smoothly.

This fast progressive drag allows a setting from low drag power to almost full drag power in less than 360° rotation.

Prevent line twist between rotor and main shaft effectively.

Prevent rotor to turn around and reverse when casting.

The design of long stroke spool makes the line wind more straight and tight, reduce the friction when casting.

Cyclonic Flow Rotor (CFR) was designed to create “cyclonic” airflow, which significantly increases air around the rotor, beneath and around the spool, with every turn of the handle. This thoroughly tested design allows for a much faster drying time if the reel becomes wet, minimizing corrosion and extending longevity of the reel.

Okuma redesigns the transmission system, enlarges gearing system and drag system, allows more strength and cranking power, offers a highspeed gear ratio.

Prevent rotor to turn around and reverse when casting.

This fast progressive drag allows a setting from low drag power to almost full drag power in less than 360° rotation.

Makes the reel smoother, more rigid and durable.

More performance in a smaller body. New generation of baitfeeder reels combining long stroke spool trip and oversized gearing for ultimate performance in a more compact body.Provide more precise tolerances for precision gear alignment, maximum cast ability and ultimate durability.

Long stroke spool 30mm. The design of slow oscillation system with long stroke spool makes the line wind more straight and tight, reduce the friction when casting.

Cyclonic Flow Rotor (CFR) was designed to create “cyclonic” airflow, which significantly increases air around the rotor, beneath and around the spool, with every turn of the handle. This thoroughly tested design allows for a much faster drying time if the reel becomes wet, minimizing corrosion and extending longevity of the reel.

Okuma has redesigned the main transmission gear. Larger diameter +15% and deeper teeth +15% for maximum power retrieve+30%. Allows now high speed gear ratio for big line retrieve : 103cm

Ultimate pinion stability for perfect main gear adjustment : super smooth gearing feeling and high durability.

Okuma's Strike Zone linecounter system incorporates a mechanical counter that precisely measures line based on spool revolutions. These counters measure in feet and are calibrated at the factory to be most accurate with a full spool and monofilament lines.

Okuma’s CVT- Clear View Technology anti-fogging system.

The Convector Low-Profile Line Counter features a Quick Drop Switch function. When engaged, this button will automatically engage the clutch as soon as you remove your thumb from the thumb bar. This allows for precise and accurate placement of your bait or lure.

The A6061-T6 machined aluminum, anodized spool will keep your braided or monofilament line tight and running straight.

The handle knob is designed with Ergo TPE material for anti-slip, ergonomic, and maximum comfort. It utilizes a metal handle arm for improved strength and reduced weight.

The Centrifugal Disc Bail (CDB) design incorporates a heavier brass disc that is perfectly weighted and balanced to create smoother bail operations. CDB increases the strength and stability of bail functions.

Okuma’s 1-K woven carbon fiber drag knob is light weight and creates progressive drag settings. Our progressive drag allows you to customize settings to specific conditions and fish or adjust your drag during a long fight.

Okuma’s C-40X long strand carbon fiber technology utilizes a special blended graphite polymer. The carbon fibers in this material are elongated and reinforced, which creates a substantially stronger composite than standard graphite. At 25% lighter, 50% stronger and 100% anti-corrosive, C-40X translates into an extremely lightweight and durably constructed.

Cyclonic Flow Rotor (CFR) was designed to create “cyclonic” airflow, which significantly increases air around the rotor, beneath and around the spool, with every turn of the handle. This thoroughly tested design allows for a much faster drying time if the reel becomes wet, minimizing corrosion and extending longevity of the reel.

The one-piece TCA™ design was built using Okuma C-40X carbon fiber technology and made with a double arm design. Compared to traditional single side designs, TCA™’s double arm offers higher torsion and flex resistance under heavy pressure for improved strength. This not only makes the reel lighter but also extremely rigid ensuring the internal parts stays in perfect alignment.

The Makaira spinning reels are in a class of their own featuring a forged stainless steel, 17-4 grade machine cut gear. This reel was designed for ultimate strength.

The Makaira drag system utilizes the complete surface area of the carbon fiber drag washers; the system has been engineered to make full contact with the outer edges of our carbon washers, which maximizes efficiency and the ability to deliver high drag outputs.

The Makaira spinning reel features a unique high output drag that can achieve extreme max pressures over 30kg. This unique drag system works very much like a conventional lever drag reel allowing anglers to pre-set their drag based on their target species or required drag output.

Makaira spinning reels are engineered to withstand the most brutal conditions the ocean can offer all the internal mechanisms are sealed and protected from salt. The result is the best-of-the-best when it comes to big game fishing reels.

The Makaira is unmatched in elite level spinning reels with a forged, machine cut aluminum body, sideplate and rotor. There are no die-cast parts on this reel. The Makaira is the elite reel in the category, with a complete forged aluminum housing.

All Makaira spinning reels are equipped with a dual anti-revere system, in order to match the same strength and integrity as the rest of the reel. The Quick-Set anti-reverse features a top of the line German stainless steel one-way roller bearing for maximum strength and pulling power.

Separate handles for both left and right hand retrieve to ensure that regardless of handle retrieve direction, there is no sacrifice in strength.